Supports both wooden and concrete poles.View image as PDF
Meets the unique requirements of any pole owner.View image as PDF
Provides a wide array of documentation to support an attachment request.View image as PDF
Easily evaluates other scenarios of your existing project to find the optimum design.View image as PDF
Quick Pole advantages and capabilities
At Sonideft we understand the varied requirements you typically need to address in order to be successful requesting a new pole attachment, or modification to an existing attachment on pole lines owned by others. Not having the flexibility or ability to address pole owner requirements (which can change mid-project), can seriously hurt your business through unwanted delays.
We have the solution!
Quick Pole software can be purchased or rented. Download instructions will be sent to you by email shortly after we process your order.
Purchase a single user license
- Includes one year of software updates and support.
- Software updates and support for $300 each year after first year.
- Low overall software cost if your requirements last more than a year.
Rent a single user license
- Rent for as little as one month.
- Software updates and support for the duration of the rental.
- Immediately gain access to all of Quick Pole's ability at a low initial cost.
- Ideal fit for customers that are unsure of their long term requirements.
Save 10% when purchasing between 5 and 20 licenses. Please contact us in advance to receive a discount. For quantities greater than 20, we'll create a custom quote specific to your needs.
Below is a list of plugins that add to the existing data libraries within Quick Pole. When these plugins are installed you will see additional choices for editing or creating items within a project.
If you find additions or updates that would be of possible value to others, please let us know.
Please note: These plugins are provided "as-is" with no warranty of any kind.
- Quick Pole provides several electronic data import methods available for your field data, saving time spent on data re-entry.
- All necessary features are integrated into a single software package, reducing time spent learning and entering data and trying to interpret and consolidate results. Quick Pole’s final result is guaranteed to reflect the results of all its features, without error.
- Evaluation and reporting processes are highly automated, satisfying many of the reporting needs of attachment permits. Just select what you want and Quick Pole will guarantee it will be included in the output package for all poles and spans in the project.
- Data entry and analysis processes flow naturally, making the software easy to follow by new users.
- Little training is required to get new users familiar and productive quickly.
- Minimal start-up costs to switch from another existing software tool or to bring new users online to address the load.
- Quick Pole has an "Expert" setting for advanced users that enables additional user interface and reporting abilities. Options that are unnecessary for some users can be removed.
- Each project within Quick Pole can be customized to address a wide range of requirements. These range from specific clearance and separation requirements, special weather load cases, to specialized reporting. Having the ability to address these needs, which can change or evolve without your approval, can help de-risk your pole attachment projects.
- Minimum clearances increased beyond code requirements in one or more categories of locations (roadways, driveways, railways, etc.)
- Additional wind load conditions
- Additional ice load conditions
- Lowest temperature expected in region
- Average snowdepth for the region
- Streetlight bonding requirements
- Clearance to power service wire drip loops
- Limits on communication bundle sizes
- Communication plant minimum separation to primary voltages
- Tension limits on power service wires to residential buildings
- Extent of mechanical protection over primary and secondary cables being less than code requirements. The deficiency may require immediate remediation (Error) or remediation at a later date (Warning).
- Often it can happen that the pole lines you intended to attach to can prove to be costly once the Quick Pole runs its analysis. When this happens you want to evaluate different options that can achieve the same end goal on a small number of poles within your project. Without this ability you could find yourself paying too much in both money and time because of business pressures – the need to Get It Done.
- Quick Pole allows you to copy the entire original intended design into a separate, editable copy where you can make changes. You can then apply different approaches to which poles you attach, where you attach or the amount you plan to attach. This process can be duplicated many times, each covering a different scenario. You can then select the scenario that suits your business needs best.
- Avoid three poles that are overloaded today and would be costly to replace. Route cables to avoid these poles.
- Instead of placing feeder and distribution cables on a five pole section, place the feeder/larger cables on another pole line route and just attach a small distribution cable in this section.
- Instead of placing a new messenger/strand to support a new communication cable, over-lash onto another existing messenger.
- We have an exceptional track record of listening to customers' requirements and doing what we can to make their work easier, more complete and easy to present.
- Sonideft releases many small incremental software updates each year so requested features can be implemented as quickly as possible.
- Whatever your specific requirements are for training, Sonideft is equipped to support you. We offer remote training, on-site training or training at our location.
- We can offer suggestions related to specific projects.
- Training and support on your schedule to help meet your timelines and cost targets.
- Quick Pole offers a cost effective and complete integrated solution in the areas of structural analysis (including soil), sags and tensions, clearances, separations and reporting requirements. No pole line analysis is complete without considering more than one aspect. Quick Pole offers a solution that addresses all of them.
- Wide range of reporting capabilities. Quick Pole summarizes the results for the average user and also provides detailed insights into key pole line behaviours for experts.
- The founder and principle engineer has over 35 years of experience helping both pole owners and third parties meet their due diligence, reporting and business needs related to pole lines.
- He has a solid foundation in the engineering principles involved in the analyses required and has been significantly involved in the development of several National Code Standards for over a decade.
- Having been exposed to several pole line analysis software tools over his career and noticing shortcomings, he made it his mission to develop a high quality, professional, multi-featured, easy to use product at an affordable price for everyone.
- As a professional engineer himself, the founder recognizes the due diligence requirements of engineers and the need to easily understand what the software is doing, while providing quality and reliable results.
- Sonideft strives for excellence and stays on top of the constantly evolving industry requirements.
- Quick Pole allows you to create, import, export and duplicate datasets of organizational standards such as hardware, structure framing, cables, wires, wire stringing tensions and anchors
- Quick Pole has been tested to meet CSA standards and is currently being tested for NESC compliance.
- Clearance values across all categories can be enforced to meet a pole owner standard higher than required by code.
- Two additional weather load criteria can be added to any project to meet pole owner requirements. Available:
- Heavy wind (wind speed at a certain temperature)
- Heavy ice (ice thickness at a certain low temperature)
- The lowest air temperature and average snow depth can be set to pole owner requirements.
- How the pole owner wishes to address several code requirements can be supported by Quick Pole by their categorization as an Error or a Warning:
- Street light bonding when within 1.0 meter of a communication messenger
- Secondary and primary mechanical protection that does not extend a full 1.0 meter above a communications messenger
- On spans less than 75 meters and either a neutral or secondary wire sags below the line of sight of a communications messenger under maximum sag conditions
- How close power service wire drip loops are allowed to be to communication messengers (1.0 meter default, 0.9 meter, 0.8 meter, 0.7 meter or 0.6 meter)
- Test maximum tension of service wires against standard residential service mast strength
- Quick Pole comes pre-loaded with example data to get you up and running quickly.
- Poles. Quick Pole contains a complete database of dimensions and physical properties (density, modulus of elasticity, fibre stress rating) for:
- Wooden poles conforming to CSA and ANSI standards separately
- Concrete poles for two major manufacturers
- Wires. Quick Pole has a database of over 1500 wires commonly used in North America, plus you have the ability to import/create additional wires from manufacturer supplied “.wir files”, or other data at any time.
- Amongst the physical data that Quick Pole retains on wires are the nonlinear stress/strain and creep curves for both the outer and optional core materials.
- The materials used are not restricted to metals such as steel, aluminum or copper (they can also be Kevlar yarns or fibreglass rods).
- The nonlinear stress/strain and creep curves are defined as fourth-order polynomials for maximum accuracy.
- Soil. Quick Pole understands the strength of Soil. This is used to determine:
- The ability of the soil around the pole to withstand both vertical compressive loads and groundline bending moments.
- The ability of a specific anchor to hold tension loads.
- Both tests are based on the class of the soil.
- Quick Pole can predict the exact position of any location along the span for any wire, under any load condition.
- Regardless of elevation changes or special tension settings, Quick Pole can easily predict the wire’s path and the point where the sag of the wire is greatest.
- Mid-Span separations of wires under different conditions (typical code requirements) can also be tested easily, including power wires that sag below the line of sight of communication attachments.
- Assuming constant ground slope between any two poles, Quick Pole can predict the clearance to ground for any wire and compare it to any applicable code requirements you selected.
- Quick Pole allows you to define as many specific points along the span to be tested against different code requirements, each point having their own elevation.
For example: If you had a roadway in the span, you could mark both edges of the road plus the center (elevation, distance in span) and test them for road clearance requirements. The remainder of the span could be tested against pedestrian values.
- A graphical span profile is provided to instantly see the results.
- Quick Pole addresses all of the standard code requirements for joint use pole lines, specifically the physical separation between:
- Highest communication and lowest power wire. Requirement varies by voltage of the power wire
- Supply drip loops and communication
- Streetlights and communication
- Extent of mechanical protection above communications for secondary and primary riser cables
- Communications conduits and supply wires
- Supply secondary conduits and communications
- Calculates all pole loads:
- All span attachments have their sag and tension results scanned for the worst conditions that a structure would be expected to support, broken out by constant components and a variable component like wind.
- All hardware items are evaluated under the worst weather load conditions for the loads they would place onto a supporting structure (forces, bending moments, wind load).
- Both linear and nonlinear structural analysis methods are available:
- Linear. In this method all structural components are modeled in a holistic Finite Element Model, the loads are applied and the resulting stresses/deflections are computed.
- Secondary effects are not included
- The variable wind component of the loads are applied in incremental direction/angle increments until a full 360 degrees around the structure has been evaluated.
- The final result reported is the one that results in the highest loads/stresses for the structure.
- Vertical buckling load capacity is evaluated against Gere-Carter methodologies, an enhanced Euler method to account for pole taper.
- Nonlinear. This method accounts for secondary effects, such as P-Delta and inherently accounts for whether the pole is buckling by virtue of whether a final converged answer is available. An unstable pole does not easily allow the analysis to stabilize at a final answer. Several abilities exist within this method:
- Geometric Nonlinearity. Accounts for P-Delta effects and is mandatory for CSA code compliance. Basically this means that the Finite Element Model for the whole structure must be updated during the analysis iterations to account for the movement/deflection of the structure and supporting members such as guy wires.
- Attachment Load Nonlinearity. This accounts for the reality that the tension in the span attachments (wires) can change as the structure they are attached to moves/deflects. This is recommended in the CSA codes, but not mandatory at this time.
- An example of this would be a pole with a short and long span with one wire attached near the top. During storm load conditions, the long span will create more tension than the short span, which will make the pole move a little towards the longer span. This action will slacken the long span a little and tighten the short span. The resulting load on the pole to handle is less than the initial differences in tension as they become much closer in reality.
- Can easily address sidewalk strut fixtures as part of the analysis.
- Will specify exact requirements for pole mounting on top of rock, or the size/class of pole to be used as a push /pole brace, if used.
- Linear. In this method all structural components are modeled in a holistic Finite Element Model, the loads are applied and the resulting stresses/deflections are computed.
- Quick Pole provides graphical representations of:
- Communication bundle assemblies.
- The pole structures before and after the loads are applied, highlighting the stressed and overloaded areas easily.
- The span of attachments between any two pole structures showing maximum sag and line of sight considerations.
- The work plan showing an aerial view of all poles in the project. Poles with analysis errors will be highlighted in red for easy locating.
- Quick Pole provides summary textual results that highlight the key items for designers. Span attachments immediately provide feedback upon additions, deletions or changes. Pole structures provide feedback during analysis of the whole project.
- Quick Pole has a variety of both general and detailed reports available to meet every customer's need presented to us to-date. Some reports get regular use while others are only used when more insight is required into a specific situation. For each pole structure, Quick Pole has eight (8) general purpose and twelve (12) detailed reports:
- Pole structure general reports:
- Pole summary
- Attachment loads by angle
- Attachment loads by height
- Sags and tensions summary
- Guy and anchor strains
- Mid-span clearances
- Communication attachments
- Custom pole summary
- Pole structure detailed reports:
- Detailed sags and tensions
- Pole segment input loads
- Linear/nonlinear comparison
- Pole segment loadings
- Attachment load changes
- Guy segment forces
- Soil model forces
- Pole forces/moments
- Pole deflections
- Analysis convergence
- Post analysis nodal summary
- Any structure report can be generated manually at a particular pole.
- All structure reports plus six project-wide reports are available to be generated as one logical report as a batch process.
- Project overview
- Project make ready summary
- Project analysis summary
- Pole staking report
- Span profiles
- Ruling span assumptions
- All reports can be exported into a variety of formats, including PDF.
- Quick Pole supports the import of data from your field data collection processes. This is an area that is high priority for Sonideft as more and more customers are beginning to collect their field data electronically.
File formats supported:
- KML/KMZ files. Standard Google Earth format. We have seen a few variations of these formats to-date and are able to import pole, anchor and building locations plus a set of other attributes which can be seen in the appropriate editors. The KML format is well defined for coordinate locations and allows other data to be included in the file at the same time. Typical examples would be to include pole class, height and species as extra data.
- CSV files. Similar to KML files, pole anchor and building data can be imported. There are plans to address other data possible in this format (such as the additions of guy wires to anchors and wire attachment heights).
- JSON files. This is currently in development and would be typical of field data collection systems such as ike GPS.
- You can start a project and evaluate any number of poles without capturing any GPS locations at all. Quick Pole supports several methods of entering field data based on traditional field data collection methodology.
- Drag and drop poles onto a work plan area and move them to the desired locations manually, checking span lengths and angles presented to the user.
- Place a couple of poles on a work plan manually to start a project and then use Quick Pole’s 'Pole Sequence Loader' functionality to load the rest of a pole line by specifying span length, pole line deflection angle and optionally any elevation changes. Laterals off this initial line can be added using this same feature and starting at the take-off pole.
- You can open the table in the coordinates editor window and manually enter coordinates for poles in X,Y perspective. You can also create a coordinates list in Excel and paste into this table.
- Any combination of the above.
- GPS coordinates can be beneficial at times for some added functionality:
- Google Street View is currently available once the datum/zone is defined for the project and at least one pole is known for its approximate GPS coordinates.
- If some of the data import features are not ideal for you, you can also paste content (with GPS coordinates) into the coordinates editor window.
- Additional GIS features are currently in development.
News & Announcements
Are you looking for a high quality, completely integrated design solution for poles?
Consider Quick Pole: It is powerful, easy to use, intuitive, and takes very little time to learn.
Contact us today for a free consultation!
The Quick Pole history
Over two decades ago (1995), the predecessor to Quick Pole was first created to serve the needs of two pole owners in Atlantic Canada. It was called "Autopole" and used Finite Element Analysis to perform a linear structural analysis of the pole and a table lookup function to determine the appropriate sags and t Tensions to use for span attachments.
While it was only designed to analyze one pole at a time, it also performed basic on-pole separation and mid-span separation tests.
Seeing the inefficiencies and possibility for user input errors with the "One-Pole-At-A-Time" behavior of Autopole, a new architectural model was seen necessary to address this and the large scale deployments of "Fibre to the XX" programs envisioned by communication utilities.
In 2013 Quick Pole was launched with the ability to assess/design a large quantity of structures/poles at once within a project. Its rapidly expanding user base has driven further improvements in the areas of data import, visualization and reporting to where it is today.