Quick Pole now has the ability to paste copied span attachments (power, strands,etc) onto new spans with some level of intelligence. Regardless of how many spans you are pasting attachments into at the same time, Quick Pole will consider the Depth of Setting and pole height of each pole, plus the attachment height of the original attachments, before pasting into each span. The attachment heights are automatically adjusted prior to pasting so that the attachments are at the same distance from the top of the pole, on every single pole. This ensures consistent framing along the entire section of poles you are placing attachments. After pasting, individual attachment heights can be adjusted if needed where pole framing differences occur.